MS, CR, HR
& GP Sheets

M.S Sheets

M.S Sheets

Sheet metal is metal formed by an industrial process into thin, flat pieces. Sheet metal is one of the fundamental forms used in metalworking and it can be cut and bent into a variety of shapes. Countless everyday objects are fabricated from sheet metal. Mild Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications.

Thickness Weight Thickness Weight
(mm) kg/sq.mtr (mm kg/sq.mtr
5 39.25 25 196.25
6 47.10 28 219.8
7 55.00 32 251.20
8 62.80 36 282.60
10 78.50 38 298.30
12 94.20 40 314.00
14 109.90 45 353.20
16 125.60 50 392.50
18 141.30 56 439.60
20 157.00 63 494.50
22 172.70 75 588.75

CR Sheets

CR Sheets

CR sheets or cold rolled sheets are hot rolled products which provides a superior surface finish, with improved physical properties of the steel, such as high formability, high strength, excellent dent resistance, good magnetic properties, tensile strength, and workability and welding properties. With Cold Rolling its thickness is reduced to precise gauges. CR Sheets are available in sheets and coils. C

HR Sheets

HR Sheets

HR sheets or hot rolled sheets are steel sheets that are soft enough to bend flat on itself in any direction, without cracking. They are ductile enough for shallow drawing used in variety of industries in the domestic market. G.I./GC Sheets are galvanized steel sheets or coils that are zinc coated and cold rolled sheets/ coils. G.I sheets are available in GI coils, Galvanised Plain sheets (GP) and Galvanised Corrugated Sheet (GC) H

Sheets

Gauge mm wt Gauge mm Wt
8 4.00 31.40 19 1.12 8.80
9 3.55 27.90 20 1.00 7.85
10 3.15 24.73 21 0.90 7.06
11 2.80 22.00 22 0.80 6.28
12 2.50 19.60 23 0.70 5.50
13 2.25 17.66 24 0.63 4.95
14 2.00 15.70 25 0.55 4.30
15 1.80 14.13 26 0.50 3.92
16 1.60 12.56 28 0.40 3.14
17 1.40 11.00 29 0.35 2.75
18 1.25 9.80 30 0.30 2.35

Chequered Sheets

CHEQUERED PLATES

Diamond plate, also known as checker plate, tread plate and Durbar floor plate, is a type of metal stock with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. Diamond plate is usually steel, stainless steel or aluminum.

Thickness Weight Thickness Weight
(mm) kg/sq.mtr (mm kg/sq.mtr
5 43.50 8 69.80
6 52.30 10 84.60
7 61.10 12 100.30

GC Sheets

G.C SHEETS

Corrugated galvanised sheet metal composed of sheets of hot-dip galvanised mild steel, coldrolled to produce a linear corrugated pattern in them. The material used is actually steel (which is iron alloyed with carbon for strength, commonly 0.3% carbon). The corrugations increase the bending strength of the sheet in the direction perpendicular to the corrugations, but not parallel to them. Normally each sheet is manufactured longer in its strong direction.

Gauge mm 250/mtr/kg 300mtr/kg
20 1.00 17.60 21.2
22 0.80 14.20 17.0
24 0.63 11.10 13.4
25 0.55 9.70 11.6
26 0.50 8.80 10.5
27 0.45 7.90 9.5
28 0.40 6.90 8.5

Conversion Table

1 inch 25.4mm
25.4mm 1 inch
1mm 0.03937 inch
1 feet 0.3048 meter
1 meter 3.2809 feet
1 Lb/ yard 0.49605 kg/m
1 kg/m 2.01591 Lbs/yd
1 Lb 0.45359 kg
1 kg 2.20462 Lbs
1 Long Ton 1.06605 M/ Ton
1 M/ Ton 0.98421 Long T.
1 Ton /sq. Inch 1.5749 kg/sq.mm
1 Kg /sq .mm 06348 Ton /sq .in
1 Litre 0.22 imperial gal
Plate 7.85 kg/sq mtr x 1mm

Address

# 98, 1 st Floor,
New Timber Yard Layout,
Mysore Road,
Bengaluru-560026

Contact

+91 9448531111
contact@bhavanisteelsandtubes.com

About us

Shaped by a lineage of sound and straightforward business principles, BHAVANI STEELS AND TUBES is built on a foundation of trust and transparency.

Location

 

© COPYRIGHT 2018 - ALL RIGHTS RESERVED - BHAVANISTEELSANDTUBES
DESIGNED BY: RADTEL INDIA PRIVATE LIMITED